Back to login
Mitsubishi LANCER EVOLUTION
Photos
Reviews and News
Owner Scores
This vehicle has not yet been reviewed
Recall Information
* Data provided by Transport Canada
Recall number
Recall date
System affected
Model year(s) affected
Recall number
2018-588
Recall date
2018-10-26
System affected
Visual System
Model year(s) affected
2008 2009 2010 2011 2012 2013 2014 2015
Manufacturer Recall Number:
SR-18-009
Units Affected:
80,610
Notification Type:
Safety TC
On certain vehicles, water may drain from the windshield cowl area onto the front wiper link ball joint. Over time, this could result in corrosion and/or wear to the joint, which could result in the separation of the wiper link ball. If separation were to occur, the windshield wipers could become inoperative, which could limit the driver’s visibility under certain operating conditions which may increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the wiper link rod with a countermeasure one, and will replace the wiper motor crank arm with a new one.
Recall number
2017-475
Recall date
2017-09-29
System affected
Engine
Model year(s) affected
2015
Manufacturer Recall Number:
SR-17-005
Units Affected:
28,615
Notification Type:
Safety Mfr
On certain vehicles, defective electrical relays may have been installed in the power distribution center. This could cause various electrical circuits to fail, potentially resulting in engine stalling, reduced engine power, or loss of engine cooling fan function potentially resulting in engine overheating. These issues could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace affected relay(s) with updated parts.
Recall number
2016-382
Recall date
2016-07-29
System affected
Airbag
Model year(s) affected
2008 2009 2010 2011 2012 2013 2014 2015
Manufacturer Recall Number:
SR-16-007
Units Affected:
66,076
Notification Type:
Safety Mfr
On certain vehicles operated in areas of heavy road salt usage, a mixture of snow, water and road-salt solution may infiltrate between the front impact sensor and the bracket that attaches it to the vehicle. Over time, repeated freezing/thawing cycles could cause a crack to develop in the sensor case allowing water intrusion and short circuit of the sensor. In the event of a crash, this could result in delayed deployment of the driver and passenger front airbags which would increase the risk of injury. Correction: Dealers will inspect the front impact sensor and replace it if it is found to be cracked. An updated designed bracket and cover will also be installed.
Recall number
2015-386
Recall date
2015-08-28
System affected
Brakes
Model year(s) affected
2014 2015
Manufacturer Recall Number:
SR15-009
Units Affected:
340
Notification Type:
Safety Mfr
On certain vehicles, the right parking brake cable may have been incorrectly installed resulting in insufficient clearance with the fuel tank, causing abrasive contact between the two components. This contact could result in the coating on the fuel tank deteriorating and allowing rust to form, which could result in fuel leakage. Fuel leakage, in the presence of an ignition source, could result in a fire causing injury and/or damage to property. Correction: Dealers will replace the right parking brake cable and inspect the fuel tank. If the fuel tank’s exterior coating is damaged from contact with the parking brake cable, the fuel tank will also be replaced.
Recall number
2014-192
Recall date
2014-05-28
System affected
Steering
Model year(s) affected
2014
Manufacturer Recall Number:
SR-14-004
Units Affected:
51
Notification Type:
Safety Mfr
Certain vehicles may have been manufactured with insufficient clearance between the power steering pressure tube and the cross-member brace, possibly causing the power steering pressure tube to rust from abrasive contact. This could cause a power steering fluid leak, resulting in increased steering effort and potential for a fire in the presence of an ignition source. This could increase the risk of injury and/or damage to property. Correction: Dealers will inspect line routing and replace the pressure line as required.
Recall number
2013-316
Recall date
2013-09-20
System affected
Powertrain
Model year(s) affected
2008 2009 2010 2011 2012 2013
Manufacturer Recall Number:
SR13-009
Units Affected:
1,009
Notification Type:
Safety Mfr
On certain vehicles, the clutch master cylinder may fail, resulting in an inability to disengage the clutch or to shift gears. This could result in unintended vehicle movement, increased stopping distances and engine stalling. Such an occurrence could increase the risk of a crash causing injury or property damage. Correction: Dealers will replace the clutch master cylinder.
Recall number
2012-001
Recall date
2012-01-04
System affected
Lights And Instruments
Model year(s) affected
2012
Manufacturer Recall Number:
Units Affected:
2,301
Notification Type:
Compliance Mfr
Certain vehicles fail to comply with the requirements of Canada Motor Vehicle Safety Standard 108 - Lighting System and Retroreflective Devices. An incorrectly manufactured turn signal lever could cause the auto-cancel function to become inoperative. The vehicle operator will, however, continue to be able to manually cancel the turn signals. Correction: Dealers will inspect and, if necessary, replace the turn signal lever.
Select Another Vehicle